Thermostat Options
Heatwell predominately uses the HT3 thermostat / controller. We have designed the HT3 as a replacement for most existing thermostats including Siemens. The HT3 comes pre-programmed and is easy to adjust.
We are not limited to just the HT3. We will supply any other popular models if required.
HT3 Thermostat Controller
The TH3 has 5 different models
- Comes in black or white, vertical or horizontal
- There is a white vertical option that can be connected through wifi and controlled from an ap
- Designed to be a replacement Thermostat for most other brands in NZ
- Dimensions are 12cm x 8cm x 1.8cm
- Easy to program
- Has manual or programmed versatility
- Has 7 day,5+2 day, or single day programming options with two heating periods per day
HT3 - Back System Settings
HT3 - Time, Day & Manual Mode
HT3 - Programming Mode
OJ Electronics MTC-UA Manual Thermostat
- User Friendly
- Quick and easy installation
- Stylish design
- Air and Floor sensing
Our basic unit is an Air and Floor Sensing manual thermostat. Setting the desired temperature on the control dial operates this thermostat. This thermostat will run continuously until turned off. Manual thermostats can be used with any of our heating systems.
Units Heatwell has used in the past
Siemens RDE100 Automatic Thermostat
Discontinued Line – No parts Available – HT3 is the replacement
- Room temperature control
- 2-position control with On/Off output for heating
- Comfort, Economy, Auto timer and Protection mode
- Auto time switch
- Adjustable commissioning and control parameters
- Mains-powered AC 230 V (RDE100) or battery-powered DC 3 V (RDE100.1)
- Multifunction input for external floor sensor, keycard contact, etc
Aube TH232 Automatic Thermostat
Discontinued Line – No parts available – HT3 is the replacement
- F mode to easily access floor sensor to enable precise floor temperature
- Compact design – one of the smallest, most attractive thermostats on the market
- Temporary bypass enables temperature override without changing programming
- Battery-free backup means no re-programming your schedule after power outage
- 7-day, 4 time periods per day. Early Start function – 24-hour clock / °C or °F
- Blue backlight display
HNB TX 928H Touch Screen Thermostat
Dicontinued Line – No Parts Available – HT3 is the replacement
- Battery-free backup means no re-programming your schedule after power outage
- 7-day, 4 time periods per day. Early Start function – 24-hour clock / °C or °F
- Blue backlight display
HT2 Touch Screen Automatic Thermostat
Discontinued Line – No Parts Available – HT3 is the replacement
Touch Screen TR8100V/EM Automatic Thermostat
Discontinued Line – No parts Available – HT3 is the replacement
Automatic Thermostat - Siemens RDE20.1
